• header-road.png
  • off-road-header.png

PLATE COLORS GOLD-GOLD GOLD/GOLD Both Inner-and outer link plates have electrolytic applied
gold color plating providing some corrosion protection and attractive appearance.
STEEL-GOLD STEEL/GOLD Outer link plates have electrolytic applied gold color plating providing some corrosion protection and attractive appearance, inner link plates have a plain steel color.


STEEL-STEEL STEEL STEEL Both Inner- and outer link plates are plain steel colored.

CHAIN TYPE TX4-RING TX4-RING Ultra low friction X-shaped seal-rings preventing inner lubrication to come out and dirt to come in the chain.


O-RING O-RING  O-shaped seal-rings preventing inner lubrication to come out and dirt to come in the chain.


NON-SEALED NON-SEALED  Roller chain without seal-rings.

Riveting method QUAD-STAKE-RIVETED-PIN

QUAD-STAKE
RIVETED PIN 

Press-fitted and 4-times riveted pins for additional strength and extra resistance against push-out forces.


SPIN-RIVETED-PIN SPIN-RIVETED PIN Full round pin-riveting method providing better distribution of stress in link plates and extra resistance against push-out forces.


BUSHING TYPE SOLID-BUSHING SOLID BUSHING Perfectly round bushings providing higher resistance to repetitive shock-loads resulting in a longer life-span of the chain.

RIVETED-BUSHING RIVETED BUSHING Projected and riveted bushings prevent kinking and seizure of the chain when used in muddy conditions.


CURLED-BUSHING CURLED BUSHING Type of bushings with a split which are sufficient for standard roller chains.

PIN TREATMENT CHROMIZED CHROMIZED Pin-treatment for a hard-chrome surface providing a longer wear-life of the chain under severe conditions.


CARBONIZED CARBONIZED Pin treatment for thoughness and a hard surface providing a longer wear life of the chain.


CASE-HARDENED CASE HARDENED Pin-treatment to improve the resistance to wear.

DURABILITY
Expected lifespan
5.000-10.000-Km 5.000 - 10.000 Km for Gamma series, when fitted with new sprockets and maintained properly according to instructions.


10.000-20.000-Km 10.000 - 20.000 Km for Omega & Alpha series, when fitted with new sprockets and maintained properly according to instructions.


20.000-30.000-Km 20.000 - 30.000 Km for Sigma & Alpha XRG series, when fitted with new sprockets and maintained porperly according to instructions.

Horsepower rating M-legenda HP-range within which the chain can be used related to motorcycle manufacturers spec's of vehicles intended for legal road-usage and to our stated expected chain life-span.


for application on vehicles with a capacity up to the mentioned value within the chain series and size.


Tsubaki perfoms a series of stress-tests according to Japanese Industry Standard (JIS B 1801-199) Of all data average value is stated. The higher the value, the stronger the chain.
Recommendation 620cc-520
Average Tensile
Strength
36-tensile-strength

 

TSUBAKI distributors

Search by country
youtube facebook